Avanti® JXN-26 IVD离心机，230V，50HZ，24A
Product No:B38623
Avanti JXN 26 的此版本可用于体外诊断 (IVD)。使用 Avanti JXN-26 离心机体验更多功能和简化的高通量样品处理，该离心机具有强大的高速功能、低热输出、不平衡耐受性和安静性能。最大容量为 6.0L，转速为 26,000rpm (82,000 x g)。自动减摩系统 (FRS) 意味着机器运行更快、更安静、产热更低，由于采用了独特的可变磁阻 (SR) 驱动器，大幅缩短升/降速时间。可存储多达 1000 个用户自定义程序。
规格
| Platform | Avanti |
| Maximum Speed | 26,000 RPM |
| Maximum g-Force | 81,770 xg |
| 生物安全验证 | Yes |
| 加速选择 | Maximum or Timed ( 1-10 minutes from 0-500 rpm) |
| 减速选择 | Maximum, Timed ( 1-10 minutes from 500-0 rpm) or Coast |
| 运行时长 | 99 min, 59 sec Continuous run, short run |
| 最大容量体积范围 | 1 - 6 L |
| Refrigeration System | Non-CFC, non-ozone depleting refrigerant |
| 温度控制 | ± 2|°C of set temperature after equilibration |
| Drive Type Cooling | SR Drive* / Air cooled |
| 温度范围 | From -10°C to +40°C in 1° increments |
| Rotor ID | Automatic |
| Zonal Capability | True |
| Pollution Degree | 2 |
| Installation Category | II |
| Material(s) | Plastic, Steel, Structural Foam |
| Finish | Powder Coat Paint |
| 重量 | 290 kg |
| 宽度 | 71 cm |
| 深度 | 86 cm |
| 高度 | 86 cm |
| Clearances | 7.6 cm (sides) & 16 cm (rear) |
| Humidity Restrictions | 80% (non-condensing) |
| 功率要求 | 200-240 VAC, 50/60 Hz |
相关产品或零部件
JA-20 定角转子, 8 x 50 mL, 20,000 rpm, 48,400 x g
JA-20 Fixed-Angle Rotor, Aluminum, Biosafety Lid
Major applications: Harvesting bacteria and cell membranes, processing tissue homogenates, separating cell particulates.
For use in Avanti J Series centrifuges
JA-21 定角转子- 18 x 10 mL, 21,000 rpm, 50,400 x g
The JA-21, rated for 21,000 RPM, is a fixed angle rotor designed to centrifuge up to eighteen 10-mL tubes at a 40-degree angle to the axis of rotation. Used in Beckman Coulter J2 and J6 series and Avanti J series centrifuges, the rotor develops centrifugal forces that can efficiently pellet subcellular organelles, viruses, bacteria, mitochondria, chlorplasts, or algae.
JS-7.5 水平转子
The JS-7.5 swinging bucket rotor, rated for 7500 rpm, is designed to pellet cells and cell debris at moderate g-forces using round, conical, or flat-bottomed tubes or bottles in buckets or multi-tube carriers. Designed for use in Beckman Coulter J-Series, J2, and J6 centrifuges.
JS-4.0 水平转子
JS-4.0 Swinging-Bucket Rotor (Unshielded), Aluminum. Unshielded, four-place rotor with aluminum rotor yoke and removable aluminum swinging buckets. Buckets are interchangeable with Microplate Carriers for spinning microtiter plates and MiniTube Racks. Holds up to four liters, four blood bags or four microtiter plate carriers. Accepts all Multi-Disc Adapters except 339119. Note: requires tie-down kit Part Number 367045 for use with Avanti J-26 XP Series centrifuges. Major applications: Rapid sedimentation of protein precipitates, large particles, cells, and cell debris. It can be used for binding studies and separating serum from whole blood. For use in Avanti J-26 XP Series, J-26S Series and J-6 Series centrifuges.
JA-14 定角转子- 6 x 250 mL, 14,000 rpm, 30,100 x g
JA-14 Fixed-Angle Rotor, Aluminum; Major applications: General-purpose, large-volume and multi-tube processing. Adapters permit use of up to 30 each 15-mL tubes and up to 72 each 3-mL tubes. For use in Avanti® J Series and J2 Series centrifuges.
JA-20.1 Fixed-Angle Rotor
JA-20.1 Fixed-Angle Rotor, Aluminum, Biosafety Lid.
Major applications: High-force, large-volume separation of particles with 100 S or larger sedimentation coefficients.
For use in Avanti J Series and J2 Series centrifuges.
JS-13.1 水平转子
JS-13.1 Swinging-Bucket Rotor, Aluminum. Major applications: Harvesting bacteria, processing tissue homogenates, separating cell particulates. Isolation of cell membrane using density gradients. For use in Avanti J Series and J2 Series centrifuges.
JA-18.1 定角转子, 24 x 1.8 mL, 18,000 rpm, 42,100 x g
JA-18.1 Fixed-Angle Rotor, Aluminum; Includes 24 reversible adapters that provide 18,000 rpm maximum speed. Tubes are not included. In the J2-HC, maximum speeds are reduced to 15,000 rpm at 45 angle and 16,000 rpm at 25 angle.
Major applications: High-force sedimentation in microcentrifuge tubes under refrigerated conditions.
For use in Avanti J Series and J2 Series centrifuges (except Avanti J-E).
JS-24.38 水平转子
JS-24.38 Swinging-Bucket Rotor, Aluminum, Titanium Buckets. Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations. For use in Avanti J Series centrifuges (except Avanti J-E). * Reaches 24,000 rpm in the Avanti J-30I centrifuge only. Not recommended for use in Avanti J-25 Series (max. speed 10,000 rpm), or Avanti J-20XP Series (max. speed 10,000 rpm). Incompatible with all J2 Series.
JA-12 定角转子（双锁式盖）- 12 x 50 mL, 12,000 rpm, 23,200 x g
The JA-12 fixed angle rotor, rated for 12,000 RPM, is designed to hold up to twelve 50-mL tubes at a 35-degree angle (see Figure 1). Used in Beckman Coulter J2 and Avanti® J series centrifuges, the JA-12 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and sub-cellular fractions, and do phase separation and binding studies.
JS-24.15 水平转子
JS-24.15 Swinging-Bucket Rotor, Aluminum, Titanium Buckets. Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations. For use in Avanti J Series centrifuges (except Avanti J-E and Avanti J-HC). * Reaches 24,000 rpm in the Avanti J-30I centrifuge only. Not recommended for use in Avanti J-25 Series (max speed 10,000 rpm), or Avanti J-26 XP Series (max. speed 10,000 rpm). Incompatible with all J2 Series.
JS-4.3 水平转子
JS-4.3 Swinging-Bucket Rotor is a four-place rotor with anodized aluminum buckets designed for use with modular disk adapters to accommodate a variety of tubes and other adapters and blood bag cups. For use in Avanti JXN-26, Avanti J-26S XP, Avanti J-26 XP, and Avanti J-HC centrifuges.
JA-25.15 定角转子（双锁式盖）, 24 x 15 mL, 25,000 rpm, 74,200 x g
The JA-25.15 fixed-angle rotor is designed to hold up to twenty-four 15-mL tubes in two concentric rows at a 25-degree angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.
JA-25.15 定角转子- 24 x 15 mL, 25,000 rpm, 74,200 x g
The JA-25.15 fixed-angle rotor is designed to hold up to twenty-four 15-mL tubes in two concentric rows at a 25-degree angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.
JA-25.50 定角转子, 8 x 50 mL, 25,000 rpm, 75,600 x g
JA-25.50 Fixed-Angle Rotor with Single Lock Lid, Aluminum. Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations. For use in Avanti J Series and J2 Series centrifuges.
