Avanti(R) JXN-26 Centrifuge, 200-240V, 50/60HZ, 24A
Product No:B34183
Experience simplified high-throughput sample processing and more control with the JXN-26 centrifuge with powerful high speed features, low heat output, imbalance tolerance and quiet performance. Has a maximum capacity of 6.0L and RPM of 26,000 (82,000 x g). The Friction Reduction System (FRS) means the machine runs quicker, quieter and cooler, with shorter cycle times with high-torque because of the exclusive Switched Reluctance (SR) drive. Stores up-to 1000 user-defined programs.
规格
| Platform | Avanti |
| Maximum Speed | 26,000 RPM |
| Maximum g-Force | 81,770 xg |
| 生物安全验证 | Yes |
| 加速选择 | 11 acceleration profiles |
| 减速选择 | 12 profiles |
| 运行时长 | Up to 99 hrs, 59 mins |
| 最大容量体积范围 | 1 - 6 L |
| Refrigeration System | Non-CFC, non-ozone depleting refrigerant |
| 温度控制 | ± 2|°C of set temperature after equilibration |
| Drive Type Cooling | Air-cooled |
| 温度范围 | From -10°C to +40°C in 1° increments |
| Rotor ID | Automatic |
| Zonal Capability | True |
| Pollution Degree | 2 |
| Environmental Conditions | -10°C to 40°C in 1° increments |
| Installation Category | II |
| Material(s) | Steel, Plastic |
| Finish | Powder Coat Paint |
| 重量 | 310 kg |
| 宽度 | 71 cm |
| 深度 | 86 cm |
| 高度 | 86 cm |
| Clearances | 7.6 cm (sides) & 16 cm (rear) |
| Humidity Restrictions | 80% (non-condensing) |
| 功率要求 | 200-240 VAC, 50/60 Hz |
相关产品或零部件
JS-4.0 水平转子
JS-4.0 Swinging-Bucket Rotor (Unshielded), Aluminum. Unshielded, four-place rotor with aluminum rotor yoke and removable aluminum swinging buckets. Buckets are interchangeable with Microplate Carriers for spinning microtiter plates and MiniTube Racks. Holds up to four liters, four blood bags or four microtiter plate carriers. Accepts all Multi-Disc Adapters except 339119. Note: requires tie-down kit Part Number 367045 for use with Avanti J-26 XP Series centrifuges. Major applications: Rapid sedimentation of protein precipitates, large particles, cells, and cell debris. It can be used for binding studies and separating serum from whole blood. For use in Avanti J-26 XP Series, J-26S Series and J-6 Series centrifuges.
JA-14 定角转子- 6 x 250 mL, 14,000 rpm, 30,100 x g
JA-14 Fixed-Angle Rotor, Aluminum; Major applications: General-purpose, large-volume and multi-tube processing. Adapters permit use of up to 30 each 15-mL tubes and up to 72 each 3-mL tubes. For use in Avanti® J Series and J2 Series centrifuges.
JS-13.1 水平转子
JS-13.1 Swinging-Bucket Rotor, Aluminum. Major applications: Harvesting bacteria, processing tissue homogenates, separating cell particulates. Isolation of cell membrane using density gradients. For use in Avanti J Series and J2 Series centrifuges.
JA-18.1 定角转子, 24 x 1.8 mL, 18,000 rpm, 42,100 x g
JA-18.1 Fixed-Angle Rotor, Aluminum; Includes 24 reversible adapters that provide 18,000 rpm maximum speed. Tubes are not included. In the J2-HC, maximum speeds are reduced to 15,000 rpm at 45 angle and 16,000 rpm at 25 angle.
Major applications: High-force sedimentation in microcentrifuge tubes under refrigerated conditions.
For use in Avanti J Series and J2 Series centrifuges (except Avanti J-E).
JS-24.38 水平转子
JS-24.38 Swinging-Bucket Rotor, Aluminum, Titanium Buckets. Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations. For use in Avanti J Series centrifuges (except Avanti J-E). * Reaches 24,000 rpm in the Avanti J-30I centrifuge only. Not recommended for use in Avanti J-25 Series (max. speed 10,000 rpm), or Avanti J-20XP Series (max. speed 10,000 rpm). Incompatible with all J2 Series.
