请求报价

3.3 mL, OptiSeal Polypropylene Tube, 13 x 33mm - 56Pk

Product No:361627

OptiSeal Polypropylene TubesFor use in: Ultracentrifuge Rotors:(Part No. 342196) SW 55 Ti; Required Floating Spacer: 361678*(Part No. 357614) TLN-100; Required Caps/Spacer: 362198(Part No. 367280) MLS-50

立即购买

Resources + Tools

技术文件 Selection Guide Rotor Calculator Adapters Racks

规格

Platform	Floor Prep
Nominal Size	13 x 33 mm
Nominal Capacity	3.3 mL
Closure	OptiSeal™
Material(s)	Polypropylene
Package Quantity	56

掌握最新资讯

及时从贝克曼库尔特生命科学专家那里获得您感兴趣的信息。

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES.
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.
沪ICP备18036651号-1
沪公网安备 31010502004935号

互联网药品信息服务资格证书（沪）-非经营性-2020-0189
沪(浦)应急管危经许[2022]200234

3.3 mL, OptiSeal Polypropylene Tube, 13 x 33mm - 56Pk

Product No:361627

规格

相关产品或零部件

13 mm Diameter Ultem Floating Tube Spacer, Quantity of Two Spacer for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: SW 55 Ti, MLS-55.Required Spacer for Tubes: (part # 361627) 3.3 mL OptiSeal Polypropylene Centrifuge Tube, 13 x 33 mm.

掌握最新资讯

13 mm Diameter Ultem Floating Tube Spacer, Quantity of Two
Spacer for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: SW 55 Ti, MLS-55.Required Spacer for Tubes: (part # 361627) 3.3 mL OptiSeal Polypropylene Centrifuge Tube, 13 x 33 mm.