Biomek i5 自动化工作站

优化实验可靠性和自动化运行时间。 Biomek i5自动化工作站是我们实验室液体处理系统产品组合之一,代表了使 Biomek 全自动液体处理工作站成为行业领先品牌的方案-结合了全球客户提出的改进建议。

  • 中高实验通量工作流程的理想选择
  • 25 个板位
  • 0.5 µL-1,000 µL(多通道)或 0.5 µL-5,000 µL(Span-8)移液体积范围
  • 带有机械抓手的单个多通道移液器(96/384)或 Span-8 移液器

 

 *本产品仅供工业与科研使用,不用于临床诊断 

选择 Biomek i5 型号

功能特点

多功能工作区

  • 具有基于网格化的开放平台
  • 内置 LED 灯照亮工作区
  • 自动耗材定位器(ALP)用于样品处理
  • 可选的封闭配置可保护样品免受空气中颗粒物的污染
  • 在台面上或台面外整合其他设备
  • 可针对特定应用进行配置

灵活的移液和工作流程管理

  • 多通道移液器(96/384 / Pin工具)或 Span-8 移液器
  • 大容量 1 mL 多通道移液器
  • 360 度旋转的移板机械手可抓取台面上任意位置的耗材
  • 一次性吸头和固定的钢针,包括穿刺针
  • 移液范围 0.5µL - 5,000 µL
  • 独立的 Span-8 通道校准
  • 8 通道液面感应
  • 支持从试管到 1,536 孔微孔板的耗材
  • 准确的孔内移液

简单的系统操作

  • 轻松自动化现有流程并执行快速的工作流程更改
  • 基于图标的软件提供支持,具有数据跟踪和 LIMS 连接功能
  • Windows 10 OS
  • 通过流程管理和调度软件延长无人值守时间
  • 自动板位校正
  • 数据驱动的操作,包括样本挑选和规范化
  • 红外光幕安全保护功能
  • 仪器状态指示灯
  • DeckOptix 摄像头用于实时、远程监控和错误视频捕获

关注应用的解决方案

  • 咨询性工作流程分析
  • 专业应用和技术支持
  • Biomek 为基因组学、药物发现和基础研究工作流提供免编方法及解决方案

产品规格明细

Minimum Table Support Requirements 71x83cm(28x33in)
Pod and Tool Type 1μL - 300 μL 96-Channel Head; 5 μL -1200 μL 96-Channel head; 0.5 μL - 60 μL Multichannel-384 Head
Tip Type T30_384; T25F_384; T50_384; T40F_384; T80_384; T40F; T80_LLS; T40F_LSS; T90; T50F; T90_LSS; T50F_LLS; T230; T230_LSS; T190F_LLS; T230_WB; T1070; T1020_WB
Operating System Windows® 10
软件软件 Biomek software, SAMI EX scheduling software, Biomek PowerPack software, Biomek Method Launcher, DART 2.0 software
显示屏 22" controller screen
Operating Modes Semi-automated, manual, controlled by operator
Autoclavable No
产品货号参考 B87583

Content and Resources

Filter by:
Resource Type
Automated Demonstrated Methods for Biomek i-Series Workstations (PDF) Learn more about automated NGS Library Construction and Nucleic Acid Sample Preparation methods for Biomek i-Series workstations
Fully Automated C100HT Biologics Analyzer Sample Preparation on a Biomek i5 Multichannel Workstation This application note describes an automated, high-throughput glycan sample preparation on the Biomek i5 Multichannel Workstation that supports the high-throughput requirements of the C100HT Biologics Analyzer.
Illumina Nextera XT DNA Library Preparation Kit Miniaturized on Biomek i5 Multichannel 384 & Echo 525 Liquid Handlers (PDF) We have demonstrated that the automated workflow for the Nextera XT Library Prep kit from aliquoting reagents to final normalization pooling can be done in 4.5 hours for 384 samples on the Biomek i5-Echo 525 integrated system, including 35 minutes of deck set up time.
Released N-linked glycan analysis employing automated sample preparation on a Biomek i5 liquid handler In this application note, automated sample preparation of the release and labeling of N-linked glycans was developed and evaluated to demonstrate large-scale, reproducible screening on released N-linked glycans.
Automating Flow Cytometry Brochure Mitigating sources of variability begins during assay design, continues during analytical method development, and through process monitoring

技术文件

Didn't find what you are looking for? For more results click 此处。