10.4 mL Polycarbonate Bottle with Cap Assembly, 16 x 76mm - 6Pk

Product No:355603

Polycarbonate Bottle with Cap Assembly for use in Ultracentrifuges Rotors: Type 90 Ti (part # 355530) Type 70.1 Ti (part # 342184) MLA-55 (part # 393203) References: For removal of JS-7.5 rotor from list: JS-7.5 IFU J-TB-007 For addition of MLA-55: MLA-55 IFU TL-TB-026

Request a Quote

Resources + Tools

Technical Documents Selection Guide Rotor Calculator Adapters Racks

Product Specifications

Platform	Floor Prep
Nominal Size	16 x 76 mm
Nominal Capacity	10.4 mL
Closure	Bottle Assembly
Material(s)	Polycarbonate
Package Quantity	6

Stay up to date with our newsletter

Receive timely updates on your favorite topics from the experts at Beckman Coulter Life Sciences

© 2000-2025 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES. PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS The listed regulatory status for products correspond to one of the below: IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use." ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagent. Analytical and performance characteristics are not established." CE-IVD, CE: Products intended for in vitro diagnostic use and conforming to the In Vitro Diagnostic Regulation (IVDR) (EU) 2017/746. (Note: Devices may be CE marked to other directives.) RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures." LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only." No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.

10.4 mL Polycarbonate Bottle with Cap Assembly, 16 x 76mm - 6Pk

Product No:355603

Product Specifications

Related Products or Parts

16 mm Diameter Noryl Cap Assembly Bottle, Quantit of One This accessory is required for the Polycarbonate Bottle Assembly (part # 355603)Adapter for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: Type 90 Ti (part # 355530)

Stay up to date with our newsletter

16 mm Diameter Noryl Cap Assembly Bottle, Quantit of One
This accessory is required for the Polycarbonate Bottle Assembly (part # 355603)

Adapter for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors: Type 90 Ti (part # 355530)