NVT 65 Near-Vertical Angle Rotor
Product No:362755
NVT 65 Near-Vertical Titanium Tube Rotor Assembly, Includes: Part Number Description: 349290 Washers, 375705 Vise, 330338 Overspeed Disks, 65,000 rpm, 858121 Torque Wrench, 976959 Torx Plug-Wrench Adapter.
Note: Non-precipitating solutions up to 1.7 g/mL in density can be run in this rotor without a reduction in rotor speed. For speed reductions for CsCl prescription, refer to the rotor manual.
For use in Optima-Series ultracentrifuges and/or instruments classified: RS
Resources + Tools
Product Specifications
| Platform | Floor Prep |
| Rotor Type | Near-Vertical (Ultracentrifugation) |
| Angle | 7.5 |
| Maximum RPM | 65,000 rpm |
| Max g-Force | 402000 xg |
| k-Factor | 21 |
| Adapters | 349289, 349900, 356571, 362202 |
| Number of Tubes | 16 x 76 mm, 8 x 13.5 mL |
| Caps and Spacers | 349900 │ 349901 │ 356571 │ 362202 |
| Nominal Capacity | 108mL |
| rMAX | 84.9 |
| rMIN | 59.5 |
| rAV | 72.2 mm |
| BioSafe | Bio-Enhanced |
| Materials | Titanium |
| Package Quantity | 1 |
Related Products or Parts
13.5 mL Quick-Seal® Polypropylene Tube, 16 x 76mm - 50Pk
13.5mL Quick-Seal Polypropylene Round Bottom Tube, 16 x 76 mm, Qty-50.
13.5 mL, Quick-Seal Round-Top Ultra-Clear Tube, 16 x 76mm - 50Pk
Quick-Seal Ultra-Clear Tubes For use in Ultracentrifuge Rotors: Type 90 Ti
8 mL Quick-Seal® Bell-Top Polypropylene Tube, 16 x 57mm - 50Pk
8 mL, Quick-Seal® Bell-Top Polypropylene Tube, 16 x 57mm - 50Pk
10 mL Quick-Seal® Bell-Top Polypropylene Tube, 16 x 67mm - 50Pk
10 mL, Quick-Seal® Bell-Top Polypropylene Tube, 16 x 67mm - 50Pk
6.3 mL Quick-Seal® Bell-Top Polypropylene Tube, 16 x 44mm - 50Pk
6.3 mL, Quick-Seal® Bell-Top Polypropylene Tube, 16 x 44mm - 50Pk
11.2 mL OptiSeal™ Polypropylene Tube, 16 x 67mm - 56Pk
11.2 mL, OptiSeal™ Polypropylene Tube, 16 x 67mm - 56Pk
16 mm Diameter Aluminum Tube Spacer, Quantity of One
Spacer for Tubes in Beckman Coulter Rotors for use in Ultracentrifuge Rotors:
NVT 65 (part # 362755)
VTi 65.1 (part # 362759)
MLN-80 (part #s 367099, 367100)
Required Spacer for Tubes:
13.5 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 76 mm (part # 342413)
10.0 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 67 mm (part # 344622); (Required Spacer 349901)
8.0 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 58 mm (part # 344621); (Required Spacer 356571)
8.0 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 58 mm (part # 357337); (Required Spacer 356571)*
6.3 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 45 mm (part # 345830); (Required Spacer 349900 in NVT 65 and VTi 65.1; 367613 MLN-80)
6.3 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 45 mm (part # 357335); (Required Spacer 349900 in NVT 65 and VTi 65.1)
4.2 mL Quick-Seal Polypropylene Centrifuge Tube, 16 x 38 mm (part # 356562); (Required Spacer 367612)
13.5 mL Quick-Seal Ultra-Clear Centrifuge Tube, 16 x 76 mm (part # 344322)
To simplify ordering, this g-Max Kit includes enough spacers to fill rotor, 50 tubes and required tools.
